Three add-on features to enhance your forklift’s safety
Studies across Europe show that thousands of fatal or near-fatal accidents are still happening every year in our warehouses.
Amongst other causes, visibility seems a major issue. With more than half of forklift accidents seriously injuring workers on foot, it's clear that more should be done to give pedestrians better warning when a truck is getting too close.
This article zooms in on what you can add to your forklift to enhance safety. For now, we will skip topics like proper driver training, creating a safer environment, and even factory inbuilt systems like presence detection and automatic cornering speed reduction. Working safely in a place where forklifts operate is part of a much wider safety topic which cannot possibly be covered in a short article.
1. Audible alarms
As obvious as it may ‘sound’, you should first make sure your forklifts have audible alarms – and that they are working properly. Good drivers will use the claxon when approaching corners, but the truck must also have a reversing alarm with a distinctive sound, so pedestrians can recognise and anticipate this even greater hazard.
2. Blue spot lights / strobe lights
When a workplace is busy or noisy, however, you can't always rely on auditory cues to know where trucks are. If many forklifts are in action, or if there is a lot of background noise from machinery, it may be difficult for pedestrians to hear the truck that’s just about to come around a corner.
Your forklift is probably already fitted with standard safety lights, but a blue spot light is a good additional safety accessory; it certainly enhances the visibility of oncoming forklifts to pedestrians. This feature projects an intense spotlight or line up to 20 feet (over 6 metres) in front and/or rear of an operating forklift, alerting nearby traffic and workers to its presence. This is particularly useful in giving an early warning that a forklift is approaching a blind corner, or is entering or exiting a trailer, a container or a warehouse door. Strobe lights can also serve as a good visual warning.
3. The safety zone system
A further advance on the blue spot idea is the safety zone system. It uses high-powered LEDs to project bright, bold red lines on the floor behind and to the sides of a truck. This is the ‘safety zone’ (see picture). These lines clearly show all workers the minimum distance they must maintain to continue working safely. When a warehouse is busy, this extra visual aid simply makes all the difference.
If people stray inside the danger area, the driver may be warned by a buzzer or some other alert system. The safety zone system is one of those quick solutions which can be fitted to both used and new trucks and is easily understood by employees.
Although add-ons enhance overall safety, the improvement they make is a functional one. As a logistics manager, it is important that you find the right balance between your trucks’ capabilities and your drivers’ safety skills. Achieving an acceptable safety level is always the result of a larger, ongoing programme.
- Contact your Mitsubishi dealer to discuss possible add-ons for your forklifts
- Conduct a safety check of your warehouse, including its layout
- Look into the possibility of setting up a regular driver safety training programme